5S-P-003
Program Writer
© Copyright 2022, PADAUK Technology Co. Ltd
Page 34 of 34
5S-P-003-UM-EN-V007
– Oct. 14, 2022
9.3 Special notes of voltage while On-board or Multi-Chip-IC writing (OTP / MTP)
(1) When programming, VPP may be higher than 11V, and VDD maximum supply current is not over 20mA.
(2) VDD may be higher than 7.5V for PDKxx/P2xx series ICs; for other series ICs, VDD may be higher than 6.5V
(Each chip will be different, please refer to the specification of the chip used).
(3) The voltage of other program pins (except GND) is the same as VDD.
If you have On-board writing or Multi-Chip (ex: MOS, EEPROM, and 2.4G), be sure to pay attention to above
notification.
Please follow the instruction in Section 9.2, especial for MTP voltage limitation.
