PACOM PNVR16-RTM, User Manual

Page: 24 / 160

User’s Manual
16

Apply to All Devices : Select to apply the same user ID and password to all selected devices if you
selected more than one device and the selected devises have the same user ID and password.
NOTES:
 If the device is a DVR, it might be necessary to enter the DVR port numbers depending on the specifications
and version of the DVR.
 When registering a four-channel network video transmitter which uses the SiRiS protocol, all four
cameras are automatically registered even if some of the four cameras are disabled.
4.
Click
Device Group
in the
Site
panel, and then the button at the bottom of the
Site
panel. The
Add
Device Group
window appears.

Name : Enter the device group name.

Location : Select an upper group to which the device group will belong.

Select Devices Below , Selected Device List : Check the box beside cameras in the left panel, and
the selected cameras are added to the right panel.
Clicking the OK button completes the device group registration.
5.
Check that the device was added to the device group correctly. Click Device Group in the Site panel
and then the arrow button ( ) beside
Device Group
. Clicking the registered group displays the list
of devices added to the device group and connection status in the Site List panel. If the connection was not
made properly, the network disconnection log is displayed (only for devices registered on the recording
service). Refer to
Appendix – Network Disconnection Log (p. 143) for details about the network
disconnection log.