User’s Manual
46
CAUTION: Event notification using the callback function inserts a one-minute-pause
after the initial paging or telephone call. This means an event detected within one-
minute pause from the previous paging notification will not initiate a new callback.
Maintaining this pause prohibits the DVR from holding the telephone line for an
extended period for paging notification.
NOTE: Callback message includes the following message:
Site ID (three-digit number) + Event (one-digit number)
e.g. 0752 => Site ID: 75, Event: 2
Network
►
Callback Center (Modem)
Figure 39 Callback Center (Modem) Setup Dialog
•
Pager Number:
Enter the target pager number.
•
Mailbox:
Enter the number for paging when the target pager uses a voice mailbox.
•
Site ID:
Enter the site ID to be included in the callback message (1~999).
•
Event:
Displays event numbers to be included in the callback message.
Notify Event to Callback Center
NOTE: Set up event-triggered devices (alarm-in, motion detector, text-in, or video
loss) in advance before setting up this Notify feature. Refer to the
3.5 Configuring for
Recording
─
Set up Devices for Event-driven Recording
section for details of setting up
each device.
0
PATH: MENU
▶
Event Action
▶
Alarm-In Action, Motion Action, Text-In Action, or video
0
Loss Action
0
1. Select the notify action from the alarm-in, motion detector, text-in, or video loss option.
2. Select
Notify
in the
Action Type
field, and press
ENTER
.
3. Select either
On
or
Off
for the selected channel.
Summary of Contents for PDR-4L
