PACOM PDR-4L Manual Download

Page: 23 / 77

Four-Channel Digital Video Recorder

Figure 5 Normal Setup Dialog

System:

System Information, Date/Time, System Check, and System Log Setup

Devices:

Camera, Alarm-In, Motion Detector, Text-In/PTZ, Alarm-Out, Audio, and

RS232 Setup

Record:

Time-Lapse Record and Pre-Event Record Setup

Event Action:

Alarm-In Action, Motion Action, Text-In Action, and Video Loss Action

Setup

Network:

Network and Callback Center Setup

Password:

Password Setup

Live Monitoring:

Sequence Dwell Time Setup, and OSD Setup

Configuration:

Quick Setup, Load Default Setup, and Clear All Data Setup

3.3 Configuring System Information

Set up System Date/Time

PATH: MENU

▶

System

▶

Date/Time

1. Move to the

Date/Time

field, and press

ENTER

. Change the values using the up/down-

arrow buttons and change the field using left/right-arrow buttons on the front panel.
Finish the setting by pressing

ENTER

NOTE: If you change the system time, the DVR will restart.

NOTE: The newly set time starts upon selecting

and entering the Admin password.

2. Move to the

Time Zone

field, and press

ENTER

to select the proper time zone from the list

shown.

3. Move to the

Daylight Savings Time

field, and select either

Off

Summary of Contents for PDR-4L














































































Search results

Summary of Contents for PDR-4L

Reviews:

Related manuals for PDR-4L

Brands by name

Popular brands

PACOM PDR-4L, Manual

Search results

Summary of Contents for PDR-4L

Reviews:

Related manuals for PDR-4L

Brands by name

Popular brands