PACOM PDR-4L Manual Download

Page: 45 / 77

Four-Channel Digital Video Recorder

Enable/Disable Motion Detector

PATH: MENU

▶

Devices

▶

Motion Detector

(Refer to Figure 18 Motion Detector Setup Dialog.)

1. Move to the selected motion detector camera.
2. Move to the

On/Off

field and select either

Off

NOTE: Changing On/Off on the title bar applies the change to all cameras.

Set up Motion Detection Sensitivity

3. Move to the

Sensitivity

field and press

ENTER

. The sensitivity may be adjusted in five

steps (1 to 5). Higher numbers result in more sensitivity.

4. Move to the

Min. Size

field and press

ENTER

. The minimum size refers to the minimum

number of detective blocks. Lower numbers result in more sensitivity.

Set up Motion Detection Zone

5. Move to the

Zone

field and press

ENTER

, the video monitor will display a full screen

window with predefined blocks defined as the motion zone.

•

The minimum motion zone is defined by four individual block units. The zone block is
positioned within the video using the front panel arrow buttons.

•

Each block segment of the zone block (in four block segments) is selected/released using
the front panel camera buttons.

NOTE: Each block segment is used for only zone block setup. The entire block
surrounding individual detectors will be sensitive when the detector is turned on.

6. The following functions may be selected after pressing

ENTER

•

Close this menu:

Closes the menu, but remains in full screen view.

•

Select Current 4 Blocks:

Sets the current four blocks for motion detection zone.

•

Clear Current 4 Blocks:

Releases the current four blocks from motion detection zone.

•

Select All Blocks:

Sets all blocks for motion detection zone

•

Clear All Blocks:

Releases all blocks from motion detection zone.

•

Reverse All Blocks:

Reverses the settings for all blocks.

•

Exit Zone Setup:

Select this menu to finish the setup and close the

Motion Detection

Zone Setup

dialog box. When selecting this menu, a dialog box will be presented to

confirm the save

option of the motion zone if changes occurred.

7. Move to the

View

field and press

ENTER

to preview the captured image. Press

ENTER

again or press

to exit the preview mode.

Summary of Contents for PDR-4L














































































Search results

Summary of Contents for PDR-4L

Reviews:

Related manuals for PDR-4L

Brands by name

Popular brands

PACOM PDR-4L, Manual

Search results

Summary of Contents for PDR-4L

Reviews:

Related manuals for PDR-4L

Brands by name

Popular brands