PACOM PDR-4L Manual Download

Page: 27 / 77

Four-Channel Digital Video Recorder

•

End Of Disk:

Enable or disable using Overwrite in case of recording space shortage.

•

HDD:

Displays the size of an installed hard disk and the remaining storage space.

•

Recording From:

The oldest recording time

•

Recording To:

The latest recording time

•

Change:

Change the settings for

Site Description

Language

, and

End Of Disk

System

►

System Information

►

Change

Figure 9 System Information Change Dialog

3.4 Configuring for live Monitoring

Enable/Disable Camera

PATH: MENU

▶

Devices

▶

Camera

1. Move to the

On/Off

field of the selected camera using arrow buttons on the front panel, and

select either

Off

by pressing

ENTER

NOTE: Changing On/Off on the title bar applies the change to all cameras.

NOTE: Deactivate any inputs to which cameras are not connected by selecting

Off

;

otherwise the recording speed might be decreased somewhat.

Summary of Contents for PDR-4L














































































Search results

Summary of Contents for PDR-4L

Reviews:

Related manuals for PDR-4L

Brands by name

Popular brands

PACOM PDR-4L, Manual

Search results

Summary of Contents for PDR-4L

Reviews:

Related manuals for PDR-4L

Brands by name

Popular brands