PACOM PDR-4L, Manual

Page: 34 / 77

User’s Manual
24
Record ► Time-Lapse Record Setup ► Recording Schedule
Figure 16 Recording Schedule Setup Dialog
Set up the recording mode by time.
•
Mode 1: While recording in time-lapse, the DVR records the image during the selected
hours with the recording speed and image quality that have been set under Mode 1 (Blue).
• Mode 2: While recording in time-lapse, the DVR records the image during the selected
hours with the recording speed and image quality that have been set under Mode 2
(Yellow).
NOTE: Refer to the Chapter 4.2 Recording for details of using Mode 1 and Mode 2.
Limit the Time-Lapse Recording Period
0 PATH: MENU
▶
Record
▶
Time-Lapse Record Setup 0
(Refer to Figure 15 Time-Lapse Record Setup Dialog.)
1. Move to the
Keep the continuous pictures field and select On .
2. Move to the hour field, and select the number of hours for continuous(time-lapse)
recording.
NOTE: The user can set up the maximum time for time-lapse storage such as 24
hours. Once the DVR has 24 hours of time-lapse video, it starts recording over the
older video. In this way the DVR has the last 24 hours of time-lapse video. The other
remaining space of the hard disk except the time-lapse storage is used for storing
video of events. In the overwrite disk mode, the video of events also starts recording
over the older video when the disk full.
NOTE: The maximum number of hours may be set from one hour to maximum number
of hours that can be stored to the hard disk. However, it cannot be guaranteed since
the maximum time will vary according to the image quality settings and other user
programmable variables.