Digital Video Recorder
67
Highlight the
Alarm-Out
box beside the desired event (
Check Recording
,
Check Alarm-In
,
Disk Full
,
Disk Bad
,
Disk Temperature
, or
Disk S.M.A.R.T.
), and press the button. A list
of Alarm Outputs appears. You can associate as many Alarm-Outs with the Event as you wish.
If the DVR detects that event, it triggers output signals on all the associated Alarm-Out
connectors. You can also have the DVR’s internal buzzer sound if an event is detected.
NOTE:
Alarm-Out
action cannot be set to
System
and
Panic
Record events.
Highlight the
Notify
box beside the desired event (
System
,
Panic Record
,
Check Recording
,
Check Alarm-In
,
Disk Full
,
Disk Bad
,
Disk Temperature
, or
Disk S.M.A.R.T.
), and press
the button. You can toggle the entire list On and Off by highlighting
Notification
and
pressing the button. You can toggle the individual items On and Off by highlighting that
item and pressing the button. Highlight
OK
and press the button to accept your changes.
NOTE: Only
notify option is available for the
System
event.
NOTE: For the Notify action to work, the DVR should be registered in the RAS (Remote
Administration System).
You can save your System Event changes by highlighting
Save
and pressing the button.
Selecting
Cancel
exits the screen without saving the changes.
Event Status Screen
Highlight
Event Status
in the Event menu and press the button. The
Event Status
screen
appears.
Figure 87 — Event Status screen.
The Event Status screen displays the status of the DVR’s systems and inputs. Events will be
highlighted, and related channels or events will be flickered for five seconds when detected.
Summary of Contents for 16 Channel
Page 1: ......
Page 2: ......
Page 12: ...User s Manual x ...
Page 112: ...User s Manual 100 Appendix E Map of Screens ...