PacketLight Networks PL-1000RO 3.3 Installation And Configuration Manual Download

Page: 98 / 211

AULT

ANAGEMENT

ACKET

IGHT

ETWORKS

PL-1000RO

3.3

NSTALLATION AND

ONFIGURATION

ANUAL

ONFIDENTIAL AND

ROPRIETARY

NFORMATION

LL RIGHTS RESERVED

AGE

To view the Configuration Changes Log:
1.

Click the

Configuration Changes

tab.

The Configuration Changes tab opens displaying the list of Configuration
events and history of the node's fault notifications. The fields are read only
and explained in the following table.

To export the Configuration Changes Log to a file:

Click

Export to File

The Opening table.csv dialog box appears.

Click

Save File

Click

To set the refresh rate of the Fault display:
1.

In the

Refresh every

field, type the number of seconds that the window

should refresh.
The minimum refresh rate is 2 seconds.

Click

Start Refresh

The information is automatically updated after the specified number of
seconds.

To refresh the Fault display manually, click

Refresh

The information is updated immediately.

To stop the automatic refresh of the Fault display, click

Stop Refresh

The automatic refresh is stopped and the

Refresh every

field is cleared.

Table 26: Configuration Changes Tab Parameters

Parameter

Description

Format/Values

Date & Time

The date and time when the change was
made.

Day of the week, Month, Day, Year,
HH:MM:SS, AM/PM

Source

The entity that caused the change.

Severity

The severity of the change.

Critical, Major, Minor, Cleared, Event

Message

The type of change.

Note

Information related to the change.

Summary of Contents for PL-1000RO 3.3



















































































































































































































Search results

Summary of Contents for PL-1000RO 3.3

Reviews:

Related manuals for PL-1000RO 3.3

Brands by name

Popular brands

PacketLight Networks PL-1000RO 3.3, Installation And Configuration Manual

Search results

Summary of Contents for PL-1000RO 3.3

Reviews:

Related manuals for PL-1000RO 3.3

Brands by name

Popular brands