PacketLight Networks PL-1000RO 3.3 Installation And Configuration Manual Download

Page: 146 / 211

ERFORMANCE

ONITORING

ACKET

IGHT

ETWORKS

PL-1000RO

3.3

NSTALLATION AND

ONFIGURATION

ANUAL

ONFIDENTIAL AND

ROPRIETARY

NFORMATION

LL RIGHTS RESERVED

AGE

132

Click

To set the refresh rate of the PM display:
1.

In the

Refresh every

field, type the number of seconds that the window

should refresh.
The minimum refresh rate is 2 seconds.

Click

Start Refresh

The information is automatically updated after the specified number of
seconds.

To refresh the PM display manually, click

Refresh

The information is updated immediately.

To stop the automatic refresh of the PM display, click

Stop Refresh

The automatic refresh is stopped and the

Refresh every

field is cleared.

To clear the optical level counters for a specific port, click

Reset Port

10.

To clear the optical level counters for all ports, click

Reset All Ports PM

Table 48: Management Port Optical Level PM Parameters

Parameter

Description

Format/Values

PM Period

The interval for averaging the
measured Rx power.

15 Minutes, Days

Type

The type of performance
monitoring.

Optical Level

Interval

The date and time of the interval.

PM Period

is set to

15 Minutes

•

Current

: The date and time of the current

interval of 15 minutes is displayed in the
first row.

•

1 to 32

: The date and time of the last 32

intervals of 15 minutes is displayed in the
second row to the last row of the table.

PM Period

is set to

Days

•

Untimed

: The date and time of the last

reset of the system or last reset of the
optical level counters is displayed in the
first row of the table.

•

Current Day

: The date and 00:00 AM of

the current day is displayed in the second
row of the table.

•

Previous Day

: The date and 00:00 AM of

the previous day is displayed in the last
row of the table.

Summary of Contents for PL-1000RO 3.3



















































































































































































































Search results

Summary of Contents for PL-1000RO 3.3

Reviews:

Related manuals for PL-1000RO 3.3

Brands by name

Popular brands

PacketLight Networks PL-1000RO 3.3, Installation And Configuration Manual

Search results

Summary of Contents for PL-1000RO 3.3

Reviews:

Related manuals for PL-1000RO 3.3

Brands by name

Popular brands