Packard Bell GPS 400 User Manual Download Page 53

Page: 53 / 54

Specifications

Hardware

Processor:

Samsung

S3C2410X02/A26 with internal clock speed 266MHz

On Board Memory

FLASH:

64MB for OS image and data storage

DRAM:

64MB

Display

LCD:

3.5” TFT-LCD

Backlight:

six levels of intensity (0, 20, 40, 60, 80 and 100% of the maximum level)

Touch Panel:

300 DPI touch screen; Finger-tapping type

Audio

CODEC:

16-bits stereo; 44.1KHz max sample rate.

Earphone Jack :

3.5 mm stereo earphone jack

Speaker

Battery

Battery Pack:

3.7 volt Lithium-Ion cell (non-removable), 2200 mAH.

Capacity Detection

: six levels of battery capacity (0, 20, 40, 60, 80 and 100%).

I/O connectors

USB

: USB (v1.1).Mini USB connector.

SD/MMC Slot

: supports SD/MMC memory cards (up to 1G bytes)

DC IN Jack

: for power source.

External GPS Antenna Connector (MMCX type)

Environment

Temperature

Operating Temperature:

0 to 40 C°

Storage temperature:

-20 to 60 C°

Humidity

20-95% non-condensing

ESD

: +/-8kv air discharge, +/-4kv direct discharge.

Vibration:

2.60 Grms, 5 ~ 500 Hz

Regulatory/Certification

Complies with CE standards.

EMI/RFI:

In Emission - Radio R&TTE directive 99/5/EC 301-440
In Immunity: EN-55024

Safety:

EN60950

GPS Receiver

Module

Chipset

: SiRF Star III solution.

Frequency:

1575.42 MHz

C/A code:

1.023 MHz chip rate.

Channel:

20 channels.

Sensitivity:

-159 dBm.

Performance

Position Accuracy:

10 meters, 2D RMS

Altitude:

max. altitude 18000 m.

Velocity:

max. velocity 515 m/s.

Interface

Baud rate:

4800 ~ 57600 bps adjustable

Output Message:

SiRF binary or NMEA-0183 GGA, GSA, GSV, RMC, VTG, GLL

Summary of Contents for GPS 400























































Search results

Summary of Contents for GPS 400

Reviews:

Brands by name

Popular brands

Packard Bell GPS 400, User Manual

Search results

Summary of Contents for GPS 400

Reviews:

Brands by name

Popular brands