Packard Bell GPS 400 User Manual Download Page 15

Page: 15 / 54

Your current location in

Vehicle Mode

Your current location in

Pedestrian Mode

Your last known location when

GPS

signal is unreliable.

The generated route.

Your selected destination.

The Compass displays the travel direction.

The

red

GPS

receiver

means that the navigation device has not yet located a reliable

GPS

signal.

The

green

GPS

receiver

means that the navigation device has located a reliable

GPS

signal

and that you are ready to navigate.

These icons display your power source, electricity

or battery

. The battery appears as green,

yellow, or red depending on whether the battery is recharged or weak.

The

GPS

bar is a toggle button that displays the remaining travel distance and travel time,

estimated time of arrival, and speed and altitude, and street name and address number.

When you have calculated a route, the

Directions

bar displays information about your next turn.

Click this bar for a complete list of turn-by-turn directions.

6.2 GPS not found

When you first start your navigation device, you will hear the message “Signal too low”. This
message means that your navigation device hasn’t yet located a reliable

GPS

signal. Check that

your device is connected and has a clear view of the sky.

Please check that:

•

The

GPS

antenna is extended or flipped up.

•

The device has a clear view of the sky for uninterrupted

GPS

reception.

Destinator

cannot

calculate the route if there is no

GPS

reception (for example, in a tunnel).

•

The navigation device is charged or connected to the cigarette lighter.

Summary of Contents for GPS 400























































Search results

Summary of Contents for GPS 400

Reviews:

Related manuals for GPS 400

Brands by name

Popular brands

Packard Bell GPS 400, User Manual

Search results

Summary of Contents for GPS 400

Reviews:

Related manuals for GPS 400

Brands by name

Popular brands