Packard Bell EasyNote NM85, Service Manual

Page: 96 / 142

CHAPTER 3: Replacing notebook components
90
Replacing the antennas
Tools you need to complete this task:
Screws removed during this task:
•
1 black M2×3 (hard drive)
•
1 black M2.5×6 (optical drive)
•
2 M2.5×6 black (palm rest - top side)
•
6 M2×3 black (palm rest - base side) - Indicated by A
in step 13 of the “Replacing the palm rest” procedure on page 49
•
9 black M2.5×6 (palm rest - base side) -
Indicated by B in step 13 of the “Replacing the palm rest” procedure on
page 49
•
2 black M2.5×4 (LCD front panel)
•
6 chrome M2.5×4 (LCD panel)
To replace the antennas:
1
Complete the steps in “Preparing the notebook” on page 37 .
2
Remove the LCD panel assembly by performing steps 2 – 15 of the
“Replacing the LCD panel assembly” procedure on page 61 .
3
Remove the LCD front panel by performing steps 3 – 5 of the “Replacing the
LCD front panel” procedure on page 79 .
4
Remove the LCD panel by performing steps 4 – 6 of the “Replacing the LCD
panel” procedure on page 83 .
5
Release the antenna cables from the retaining latches securing them, and
then carefully pry the cables loose from the LCD assembly lid to remove
the antennas.
Phillips #0 screwdriver
Flat screwdriver or Non-marring plastic scribe