96
Replacing the Lower Covers
Replacing the Battery
1.
Replace the Memory Cover and press down
around the perimeter to snap it in to place.
2.
Replace the Wireless Cover and press down
around the perimeter to snap it in to place.
3.
Secure the covers in place with the captive screws.
1.
Slide and hold the battery release latch to the
release position (1), then insert the battery pack
in to the main unit (2).
2.
Slide the battery lock/unlock latch to the lock
position.
1
2
Summary of Contents for EasyNote NJ Series
