manualshive.com logo in svg

Packard Bell EasyNote NJ Series, Disassembly Manual

The Packard Bell EasyNote NJ Series is a versatile and reliable laptop designed for effortless everyday computing. To ensure hassle-free maintenance and repairs, we offer a detailed Disassembly Manual that can be easily downloaded for free from manualshive.com. This manual provides step-by-step instructions for disassembling and servicing your device, empowering you to keep your laptop in excellent condition.

Share
Download
background image

31

Removing the Speaker Modules

1.

See “Removing the Upper Cover” on page 28.

2.

Lift the plastic covering away from the Upper Cover to expose the Speaker cables.

3.

Remove the Speaker cables from the cable channel. Ensure that the cables are free from all cable clips.

4.

Continue removing the cable from the right side cable channel. Ensure that the cable is free from all cable 

clips.

Summary of Contents for EasyNote NJ Series

































































































Reviews:

No comments

Related manuals for EasyNote NJ Series

Acer Aspire One AOP531h Quick Manual preview
Aspire One AOP531h
Brand: Acer Pages: 12
Time Warner Cable SIERRA WIRELESS 250U 4G/3G LAPTOP CARD Quick Start Manual preview
SIERRA WIRELESS 250U 4G/3G LAPTOP CARD
Brand: Time Warner Cable Pages: 5
Schenker XMG U726 User Manual preview
XMG U726
Brand: Schenker Pages: 312
DIGILION Dazzle M100 User Manual preview
Dazzle M100
Brand: DIGILION Pages: 15
Acer NX.K86EX.004 User Manual preview
NX.K86EX.004
Brand: Acer Pages: 77
Acer NX.ADDEX.019 User Manual preview
NX.ADDEX.019
Brand: Acer Pages: 73
Acer Aspire 3 A315 User Manual preview
Aspire 3 A315
Brand: Acer Pages: 82
Acer A315-43 User Manual preview
A315-43
Brand: Acer Pages: 73
Acer SF314-43 User Manual preview
SF314-43
Brand: Acer Pages: 78
Acer NX.HE3EX.03Y User Manual preview
NX.HE3EX.03Y
Brand: Acer Pages: 73
Gateway NV75S02u User Manual preview
NV75S02u
Brand: Gateway Pages: 118
Samsung NP754XFG-KB2US User Manual preview
NP754XFG-KB2US
Brand: Samsung Pages: 108
Toshiba Satellite L855-S5163 Manual preview
Satellite L855-S5163
Brand: Toshiba Pages: 4
Toshiba Satellite L855-S5155 Manual preview
Satellite L855-S5155
Brand: Toshiba Pages: 4
Toshiba Satellite L775D-S7340 Specifications preview
Satellite L775D-S7340
Brand: Toshiba Pages: 4
Toshiba Satellite L775D-S7330 Specifications preview
Satellite L775D-S7330
Brand: Toshiba Pages: 4
Toshiba Satellite L775D-S7226 Specifications preview
Satellite L775D-S7226
Brand: Toshiba Pages: 4
Toshiba Satellite L775D-S7224 Specifications preview
Satellite L775D-S7224
Brand: Toshiba Pages: 4

Brands by name

Popular brands

Load more brands