61
Replacing the LCD Brackets and FPC Cable
Step
Size
Quantity
Screw Type
LCD Brackets
M2*3
4
1.
Insert the LCD Cable into the panel connector
as shown.
2.
Secure the connector by replacing the adhesive
strip as shown.
3.
Replace the adhesive protection strip as shown.
IMPORTANT:
Ensure that the LCD Cable runs in front of the brackets to avoid trapping when the Bezel is
replaced.
Summary of Contents for EasyNote NJ Series
