69
5.
Insert and tighten the five captive screws in the Thermal Module in numerical order from 1 to 5.
NOTE:
The Thermal Module is secured with six screws on models with VGA support.
Replacing the RTC Battery
1.
Locate the defective RTC battery. The Mainboard must be removed from the Lower Cover to access the
battery.
2.
Insert the replacement battery into the Mainboard socket.
6
5
3
1
2
4
Summary of Contents for EasyNote NJ Series
