Packard Bell DIGITAL TV 170 / 230 / 300 SW, Owner'S Manual

Page: 2 / 156

2
User’s Guide
S
AFETY
N
OTICES
WARNING:
To reduce the risk of electric shock do not remove cover (or back).
No user serviceable parts inside. Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the
user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING:
To prevent fire or shock hazard, do not expose the set to rain or moisture. Do not rub or strike the
Active Matrix LCD with anything hard as this may scratch, mar, or damage the Active Matrix
LCD permanently.
CAUTION:
Do not attempt to modify this product in any way without written authorization. Unauthorized
modification could void the user’s authority to operate this product.
Power
This set operates on a DC supply provided by the AC-DC adaptor, the voltage is as indicated on the
label on the back cover. Use only the supplied AC-DC adaptor with the set and never connect an
AC mains to the set directly. The AC-DC adaptor operates on an AC mains supply, the voltage is as
indicated on the label of the AC-DC adaptor.
a. Connect the DC plug of the AC-DC adaptor to the 12V/24V socket of the set.
b. Connect the AC-DC adaptor and it’s power cord.
c. Connect the power cord to an AC power outlet.
In the event of thunderstorms or power cuts, please pull out the mains plug of the AC-DC adaptor
and the aerial plug. Do not allow anything to rest upon or roll over the power cord, and do not
place the set where the power cord is subject to damage.
Service
Never remove the back cover of the TV; this can expose you to high voltage and other hazards. If
the TV does not operate properly, unplug it and refer to the Service and Warranty Guide.
Antenna
Connect the antenna cable to the connection marked Ant. (on the rear). For best reception, use an
outdoor antenna.
Location
Position your TV so that no bright light or sunlight will shine directly on the screen. Do not expose
the TV to vibration, moisture, dust or heat. Also ensure that the TV is placed in a position that
allows a free flow of air. Do not cover the ventilation openings on the back cover. You can install
the TV on a wall or place it on a table-top or similar flat surface. Mount the TV securely to elimi-
nate the risk of injury from the TV falling.
Cleaning
Unplug the TV before cleaning the face of the LCD Screen. Dust the TV by wiping the screen and
cabinet with a soft, clean cloth. If the screen requires additional cleaning, use a clean, damp cloth.
Do not use liquid or aerosol cleaners.
English