Pack Mule PC NXG Series, Manual

Page: 31 / 50

25
LED
Code
Smart View
Fault Code
Fault
Category
Possible Cause Fault Clearance
11 F41108 4 Unable to control output current. Check wiring.
12 F42101 4 CANbus fault condition detected
on multinode system.
Check CANbus wiring.
12 F42102 4 CANopen slave has not transmit-
ted boot-up message at power up. Check status of all nodes
on CANbus.
12 F42103 4 CANbus fault condition detected
on multinode system. Check CANbus wiring.
12 F42104 4 CANbus fault condition detected
on multinode system. Check CANbus wiring.
12 F42105 4 CANbus fault condition detected
on multinode system. Check CANbus wiring.
12 F42106 4 CANbus fault condition detected
on multinode system. Check CANbus wiring.
12 F42107 4 CANbus fault condition detected
on multinode system. Check CANbus wiring.
12 F42108 4 CANbus fault condition detected
on multinode system. Check CANbus wiring.
12 F42110 4 Received RPDO doesn’t contain
enough bytes. Check PDLOs on all
CANbus nodes are
configured correctly and
match up.
12 F42111 4 Heartbeat not received within con-
figured time out. Check status of all nodes
on CANbus.
12 F42112* 4 Internal CANbus fault. Internal software fault.
12 F42113 4 Internal CANbus fault. Internal software fault.
12 F42114 4 Internal CANbus fault. Internal software fault.
12 F42115 4 Internal CANbus fault. Internal software fault.
12 F42116 4 Internal CANbus fault. Internal software fault.
12 F42117 4 Internal CANbus fault. Internal software fault.
12 F42118 4 Internal CANbus fault. Internal software fault.
12 F42119 4 Internal CANbus fault. Internal software fault.
12 F42120 4 Internal CANbus fault. Internal software fault.
12 F42121 4 Internal CANbus fault. Internal software fault.
12 F42122 4 Internal CANbus fault. Internal software fault.
12 F42123 4 Internal CANbus fault. Internal software fault.
12 F42124 4 Internal CANbus fault. Internal software fault.
12 F42125* 4
12 F42126* 4
13 F43101 4 DSP reports invalid protocol ver-
sion on dual processor platform. Internal software fault.
13 F43102 4 Internal hardware fault. Internal hardware fault.
13 F43103 4 Attempting to set too man faults. Internal software fault.
13 F43104 4 Communication error between
host and DSP processors. Internal hardware fault.
Fault Codes and Troubleshooting Chart (continued)