Oscillator
- Enable
The 6415 Enable input factory default is the drive is enabled
unless the Enable opto is driven. However, this functionality can
be reversed, by inserting jumper J6 5-6, so that the opto must be
driven to enable the drive.
Minimum opto current (opto on) 3 ma
Maximum opto current (opto on) 4.5 ma
Oscillator
- Enabled LED
LED is lit when drive is enabled. A fault is indicated if the drive is
commanded enabled but the LED is not lit.
6415 Installation and Hardware Reference Manual - Rev E
3 - 13
Powering
Up
USER'S
CONTROL
ELECTRONICS
5Vdc OPTO SUPPLY
J4
6415
ENABLE-
2.21K
1K
TLP 621
ENABLE
DISABLE
23
11