Cabling diagram
- J3 motor
Note:
The colors in the diagram follow the Pacific Scientific
stepper motor cable color code.
Procedure
1. Strip the wires to 0.27 in (7mm).
2. Attach wires to connector as indicated in the diagram.
Note:
Make sure the screws on the PCD connector are tightened
down firmly on the wiring.
Caution
Do not solder the tips of the cables before insertion into the
connector. Solder can contract and cause a loose connection
over time.
2 - 12
6415 Installation and Hardware Reference Manual - Rev E
5
4
3
2
1
To
Drive
To
Motor
A (Black)
A (Orange)
B (Red)
B (Yellow)
Motor Case
Gnd (Green)
.27 in
.27 in
.27 in
.27 in
.27 in
(7 mm)
(7 mm)
(7 mm)
(7 mm)
(7 mm)
