Pacific Helmets F15, User Information

Page: 6 / 48

F 1 5 U S E R I N F O R M AT I O N G U I D E 6
WARNINGS
⚠
The helmet is designed to absorb shock by partial
destruction of, or damage to, the shell and liner. This
damage may not be visible. If subject to severe impact or
deterioration, the helmet is to be inspected, or replaced,
even if it is apparently undamaged.
⚠
This helmet is not designed to provide protection from the
following hazards: non-ionizing radiation, ionizing radiation,
CBRN, explosions, and gun shots.
⚠
The length of the usable life of this helmet will be affected
by the type(s) of material used in its construction and
the environment in which the helmet is used and stored.
Recommendations on this topic should be sought from the
manufacturer.
⚠
The safety intended to be provided by the helmet can
only be ensured when it is properly assembled and
correctly fitted, and that removable parts shall not be worn
separately.
⚠
When fitted with another item of personal protective
equipment or with an accessory (other than those supplied
by Pacific Helmets (NZ) Ltd for use with this helmet), a
helmet marked as complying with EN443 might no longer
satisfy all clauses of the standard.
Applies to EN443 certified
helmets only.
⚠
This helmet complies with the retention requirements
of EN443 when the chinstrap supplied by the helmet
manufacturer is worn and adjusted in accordance with
these instructions.
EN443 certified helmets only.