Pacific Helmets F15, User Information

Page: 44 / 48

F 1 5 U S E R I N F O R M AT I O N G U I D E 44
STANDARDS INFORMATION
AS/NZS4067:2012
Protective helmets for structural firefighting
• No helmet can protect the wearer against all possible types of
impacts
• Do no modify or remove parts or add accessories which are
not approved by the manufacturer. Replace harness and other
components as recommended by manufacturer.
• Helmet and face shield may be seriously damaged by certain
substances. Manufacturer’s instructions should be followed for
cleaning and maintenance.
• This helmet must be properly adjusted and secured to the head,
with all components in place, to provide the designed level of
protection.
• For maximum retention, the helmet must fit firmly on the head, and
all retention straps must be securely fastened.
• No attachments should be added nor any alterations made to the
helmet except those recommended by the helmet manufacturer.
• If replacement of any components of the harness is necessary, the
complete harness should be replaced.
EN443:2008 / CE / MED
Helmets for firefighting in buildings and other structures,
EN443:2008, complies with the PPE Regulation (CE), and Marine
Equipment Directive (MED)
Explanation of the symbols shown on labels fitted inside the helmets.
Year of manufacture e.g. 18 (2018)
Surface electrical insulation test E2, E3