Pacific Helmets F15, User Information

Page: 34 / 48

F 1 5 U S E R I N F O R M AT I O N G U I D E 34
• The neck protector and headband comfort padding may be
machine washed and dried as instructed below. Wash and
dry at temperatures below 40°C.
• Wear protective gloves and eye/face splash protection
when cleaning soiled items.
• Do not wash protective helmets or other protective
clothing alongside personal items.
• Do not dry clean your helmet components.
ROUTINE CLEANING AND DISINFECTION
Clean and disinfect your protective helmet after each use or whenever
your helmet has become soiled. You may clean your helmet with or
without the neck protector, comfort padding, and chinstrap. However
it is advisable to remove them before cleaning the protective helmet.
Use the following procedures for routine cleaning by hand in a utility
sink:
1. Choose a utility sink that is specifically used for cleaning
protective gear; do not use a kitchen sink or other sink that is
employed for personal products.
2. Optionally remove the neck protector and chinstraps and wash
them separately using the instructions for machine washing.
3. Brush off any loose debris.
4. Fill the utility sink with warm water no hotter than 40°C.
5. Use a mild detergent in an amount according to the detergent
supplier’s instructions.
6. Scrub the helmet exterior gently using a soft-bristle brush.
40˚