Pacific Helmets F15, User Information

Page: 20 / 48

F 1 5 U S E R I N F O R M AT I O N G U I D E 20
ADJUSTING THE HEADBAND HEIGHT (OPTIONAL)
There are three levels of wearing height for the headband. Your helmet
comes preset at the mid height which will suit the majority of wearers.
For smaller head sizes adjust
the headband to allow your
head to sit deeper inside the
helmet, and vice versa for larger
head sizes.
1. Detach Cradle Hanger (B)
from Liner (A). Remove the
cradle hanger from the liner
slot by pulling upwards on
the ribbon (C).
2. Detach Headband (D)
from Cradle Hanger (B).
Disengage the headband
boss by bending the cradle
hanger to enable the boss
to pop free
3. Reattach Headband (D)
to Cradle Hanger (B).
Reattach the boss on the
required level by sliding the
boss into the cradle hanger
on one edge with the cradle
hanger bending, then slide
the other side of the boss in.
4. Reattach Cradle Hanger
(C) to Liner (A). Push the
cradle hanger back into the
liner slot firmly. Repeat for
all 4 cradle hangers.
B
B
B
D
A
A
LARGE
MEDIUM
SMALL