12"
12"
17 3/4"
24"
8"
20 5/8"
8"
3"
3"
15 5/8"
11"
24"
12"
12"
16 3/4"
12"
12 3/4"
24"
7"
14"
15"
20 3/4"
26"
10"
10"
22 5/8"
4
VISTA and CLASSIC-C
070509-16
5055.3
Minimum Clearances to Combustibles
Single Wall Connector - Residential
Alcove height - 7' min.
Alcove depth - 3' max.
Double Wall Connector - Mobile Home
Double Wall Connector - Residential
ASSEMBLY
CRATE REMOVAL:
1) Carefully remove wood top and supports.
2) Remove plastic cover.
3) Using a 7/16" wrench, remove lag bolts that secure stove
body to bottom pallet.
4) Place stove body carefully on its back.
5) Using a 3/4" wrench, remove 1/2" nuts and save them for
later use.
6) Remove pallet retaining brackets from stove bottom.
PEDESTAL KIT:
1) With the unit on its back and removable cover facing up,
align the pedestal mounting holes with the studs on stove
bottom.
2) Secure in place with 1/2" nuts previously removed.
3) Carefully place the unit in an upright position.
LEG KIT:
1) With the unit on its back and removable cover of the ash
drawer enclosure facing up, align mounting holes with
studs on stove bottom.
2) Position the legs on the stove.
3) Place the 1/2" washers over the studs and secure in place
with 1/2" nuts previously removed.
4) Carefully place the unit in an upright position.
OPTIONAL ASH CLEANOUT SYSTEM:
1) With stove body laying on its back, remove the 1/4” x 1”
Tek screw located at the top left of the stove bottom.
2) Remove the ash system hole cover and gasket located
under the stove. discard the cover plate and gasket.
3) Place new gasket provided over existing studs.
4) Install ash dump system over gasket and secure with two
1/2” nuts previously removed.
5) Install the 1/4” Tek screw back to the original hole and
secure.
FIG. #1a
