070509-16
VISTA and CLASSIC-C
5
5055.3
36" (914 mm)
Minimum
Radiation shield
Chimney support
Chimney connector
Non-combustible floor
protector
* 4" diameter air inlet with rodent
screen
* If crawl space is well ven-
tilated it is not necessary to
extend air inlet to outside
Chimney
Roof flashing
Storm collar
Hooded vent
Attachment to floor for
mobile homes
Spark arrestor
rain cap
FIG. #2
7' (2.1 m.)
Minimum
Ceiling Height
58" (1473 mm)
Minimum
48"
(1219 mm)
Minimum
The chimney may incorpo-
rate an offset. To do this
safely, all sections of
listed connector, offset
elbows and chimney section
must be screwed together by
at least three sheet metal
screws per joint. The chimney
must be suitably supported
by the chimney manufac-
turer's listed offset sup-
port.
