background image

10

ADL Sentry User Guide

 Overview

Features

Compatibility

•  Facilitates radio equipment mix and match

•  Interoperable with Pacific Crest (RFM, PDL, and ADL), SATEL 

®

, and Trimble

® 

radio 

products

•  All models support 12.5 kHz and 25 kHz channel bandwidth communications

•  40 MHz-wide channel tables (390 MHz–430 MHz and 430-470 MHz models)

•  Provides upgrade path for existing installations

 Fast over-the-air data rate

•  19,200 bits per second

•  Reduced latency provides better GNSS position information

•  Shorter transmit times reduces power consumption for longer battery life

 User-selectable RF output

•  Select between 0.1 W, 0.5 W, 1 W, 2 W, and 4 W

•  Increase range by switching to a higher output power

•  Increase battery life by reducing output power when you do not need the range

 Rugged construction

Designed specifically for real-world working environments

•  All metal construction and shock-mounted electronics ensure highest reliability and 

EMI-resistance.

•  Watertight, corrosion-resistant connectors stand up to bad weather conditions.

 Software compatibility

Current versions of the following software were tested and verified for compatibility with 
Windows® 7, Windows XP, and the Business Edition of the Windows Vista® operating systems:

• ADLCONF

•  PCC Range Estimator

Summary of Contents for ADL Sentry



























Reviews: