23
ADL Sentry User Guide
Protection from electromagnetic interference
Always position the radio as far as possible away from:
• Other antennas, particularly transmitting antennas
• Electrical
generators/alternators
• Regulated power supplies
• Rotating beacons, strobe lights
Pinouts and Connectors
The radio uses a Turck 8-pin circular data/power connector. For a mating connector,
Pacific Crest recommends using a Turck RSS 8T, or equivalent.
The following table shows the radio’s pin assignments:
Pin No.
Description
1
Signal Ground
2
Power Ground
3
Tx (Connects to the external device’s Rx pin)
4
RX (Connects to the external device’s Tx pin)
5
RTS
6
N/C
7
CTS
8
9-30 VOLTS, 2 AMP Max
The following figure shows the orientation of the pins in the radio’s female data/power
connector. It shows a rear view of the pin-outs (looking from behind the connector).
Summary of Contents for ADL Sentry
Page 1: ...ADL Sentry User Guide...
