-18-
MANUAL BRAKE RELEASE FOR ALL PACESAVER SCOOTERS
Activating the disengage mechanism is as follows.
1. Be certain the scooter is on fl at level ground.
2. Locate the Black release knob on the top right of the rear cover. Pull the black
knob up fi rmly until the cart freewheels. This disengages the Posi-Lock disc brake but
retains dynamic & regenerative motor braking if the key switch is turned on.
3. Always turn the key to the "OFF" position when the brake release is in the up posi-
tion. This disengages the dynamic braking systems and initiates our exclusive "Push
to Fast" braking system which activates if the scooter rolls beyond a crawling speed.
Never sit on the scooter with the brake disengaged! The scooter can move unexpect-
edly and cause damage or injury.
There is a label on the rear cover like this
to help you operate the disengage.
Deactivating the disengage is as follows.
1. First, press the black release knob back down until it is fi rmly seated in its original
position to engage the "posi-lock" brake.
2. Second, turn the key to the "OFF" and then to the "ON" position. All braking sys-
tems are again activated and normal scooter operation may resume.
SHOULD THE BRAKE DISENGAGE ON A SCOOTER EVER
APPEAR TO WORK POORLY OR INCORRECTLY, STOP RIDING
IMMEDIATELY AND CONTACT YOUR DEALER FOR SERVICE!
Rear Cover Label
