Pace Technologies TERAPRESS TP-7100S, Instruction Manual

Page: 15 / 62

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
TERAPRESS TP - 7100S
Mounting Press
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 - 520 - 882 - 6598 Fax +1 - 520 - 882 - 6599 email: pace@metallographic.com Web: https://www.metallographic.com
4.0 Start - up and Operation
The TERAPRESS TP 7100S mounting press has been designed for ease - of - use in producing high
quality metallographic mounts using materials such as phenolics, diallyl phthalates, hard glass - filled
epoxies, and conductive thermosets.
The TERAPRESS TP 7100S comes with preloaded procedures to make initial startup as fast as
possible. Custom procedures can also be created and saved for maximum versatility. Section 4.2
gives an overview of all relevant functions on the main screen, and sections 4.3 - 4.4 describe how to
load procedures as well as how to create custom ones. Section 4.7 gives a general procedure for
compression mounting along with recommended mounting guidelines.
4.1 General
4.2 Touch Screen Overview and Functions
Current Procedure
Begins mounting cycle with
currently displayed parameters.
Opens the Procedure Manager
for editing and loading various
procedures.
Begins cooling manually. This
turns on the water pump.
Temperature/Time
Graph
Main Operation Buttons
Settings for Current
Procedure
Returns to the startup
screen.
Opens the settings.
Moves the ram down
and up.
Main Operation Buttons
10