Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
5
PICO-155S Precision Saw
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: [email protected] Web: http://www.metallographic.com
2.2
Shipping
When moving cutter, lift by the base.
The
PICO-155S
is constructed with sensitive
electronic and mechanical components.
DO NOT DROP.
!
Caution:
2.0 Unpacking, Shipping and Installation
2.1 Unpacking
Unit is delivered in a box. Unpack and check for
completeness of parts.
Crate Measures WxHxD: 24
” x 36” x 23”
Crate Weight:
Approximately 105 lbs
2.3 Installation
Take care to avoid bodily injury.
!
Install unit carefully! Improper installation voids warranty.
The
PICO-155S
should be placed on a flat stable surface.
Connect the micrometer by pushing the micrometer flush then snugly tighten the locking bolt.
CAUTION:
DO NOT over tighten as this may damage the micrometer.
Then position the specimen arm and loading bar to the micrometer
shaft so they are both at about the same angle to the shaft.
(Installation continued on next page)
