Pace Technologies PICO 155S, Instruction Manual

Page: 8 / 54

Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
4
PICO-155S Precision Saw
I
NSTRUCTION
M
ANUAL
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520-882-6598 Fax +1 520-882-6599 email: pace@metallographic.com Web: http://www.metallographic.com
1.4 Features
Improved Coolant System
The
PICO-155S is an upgraded version
of the PICO 155P medium speed
wafering saws. Utilizing a 24V pump and
flexible coolant lines the
PICO-155S
allows also for better coolant distribution,
even for smaller diameter wafering
blades. The advantage over the PICO-
155P is the ability to store information on
the three programmable buttons
Motor feedback
The
PICO-155S is equipped with a 150 W
motor that has a feedback loop for
maintaining the cutting velocity, even
under higher loads and increased drag.
In addition, the circuit board has an
overload protection feedback which will
stop the motor if the blade becomes
jammed or pulls too many amps.
Easy to use
The
PICO-155S is an easy-to-use
precision cutter with simple controls.
Simply align the sample and start the cut.
The variable speed motor can easily be
adjusted using the touch screen rpm
adjustment features. Following
completion of the cut, the motor will stop
and activate an audible buzzer.
Multi-purpose machine
The
PICO-155S saw is a very versatile
precision cutter. It can be used as a
standard precision saw or it can be used
as a table top saw for cutting larger
samples; samples such as printed circuit
boards.
Standard Setup
Table Cutting Setup