Pace Technologies OMEGA SRT-15/150, Instruction Manual

Page: 25 / 42

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520 - 882 - 6598 Fax +1 520 - 882 - 6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
OMEGA SRT - 15/150 Dual Superficial /
Rockwell Hardness Tester
Scales Indenters Initial Test
Force (N)
Total Test Force
(N)
Application Examples
15N
Diamond
Indenter
29.42 (3 kg)
147.1 (15N)
Hard alloy steel, nitride steel, carburized
steel, various heavy steel plate, etc.
30N 294.2 (30N)
Surface quenched steel, carburized steel,
knife blades, thin steel plate, etc.
45N 441.3 (45N)
Quenched steel, tempered steel, hard cast
iron , etc.
15T
Ball indenter
1.5875 mm
(1/16 inch)
147.1 (15N)
Annealed copper alloy, mild steel sheet,
brass, bronze, etc.
30T 294.2 (30N)
Mild steel sheet, aluminum alloys, copper
alloys, brass and bronze, malleable cast
iron, etc.
45T 441.3 (45N)
15W
Ball indenter
3.175 mm
(1/8 inch)
147.1 (15N) Annealed copper alloy, mild steel, etc
30W 294.2 (30N)
Aluminum and aluminum alloys, magnesi-
um, mild steel, etc.
45W 441.3 (45N)
Zinc, aluminum, lead, bronze, beryllium
bronze, etc.
15X
Ball indenter
6.35 mm
(1/4 inch)
147.1 (15N)
Aluminum, tin, zinc, soft metals, plastics,
hard, etc.
30X 294.2 (30N)
45X 441.3 (45N)
15Y
Ball indenter
12.7 mm
(1/2 inch)
147.1 (15N)
30Y 294.2 (30N)
45Y 441.3 (45N)
Superficial Rockwell Hardness Testing
21