Pace Technologies OMEGA SRT-15/150, Instruction Manual

Page: 22 / 42

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520 - 882 - 6598 Fax +1 520 - 882 - 6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
OMEGA SRT - 15/150 Dual Superficial /
Rockwell Hardness Tester
3.0 Safety Guidelines
3.1 Warning Sign
!
This sign points to special safety features on the machine.
Always follow proper operational guidelines and avoid contact with lubricants and abrasives.
3.3 Emergency Statement
!
Operate unit as specified in this manual.
!
Disconnect power before opening unit.
!
Lower stage to avoid damaging indenter when not in use.
!
Cover unit with dust cover when not in use to eliminate dust contamination.
3.2 Safety Precautions
18
!
Careful attention to this instruction manual and the recommended safety guidelines is
essential for the safe operation of the OMEGA SRT - 15/150 .
!
Proper operator training is required for operation of the OMEGA SRT - 15/150 . Any
unauthorized mechanical and electrical change, as well as improper operation, voids all
warranty claims. All service issues need to be reported to the manufacturer / supplier.