Pace Technologies OMEGA SRT-15/150, Instruction Manual

Page: 20 / 42

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520 - 882 - 6598 Fax +1 520 - 882 - 6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
OMEGA SRT - 15/150 Dual Superficial /
Rockwell Hardness Tester
2.3.8.1e LIMITS: (Limit values setting)
Upper and lower limits can be set in this mode.
If a hardness value is within the upper and lower
limits a “ GO ” (qualified) value will be displayed
and printed. For values outside of the set rang a
“ NG ” (un1ualified) value will be higher than the
lower limit.
To turn “ ON ” use cursor to set upper and lower
limit. Press < OK > to set value.
16