Pace Technologies OMEGA SRT-15/150, Instruction Manual

Page: 18 / 42

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - ▲
I
NSTRUCTION
M
ANUAL
3601 E. 34th St. Tucson, AZ 85713 USA Tel. +1 520 - 882 - 6598 Fax +1 520 - 882 - 6599 email: pace@metallographic.com Web: http://www.metallographic.com
Please read this instruction manual carefully and follow all installation, operating and safety guidelines.
OMEGA SRT - 15/150 Dual Superficial /
Rockwell Hardness Tester
2.3.8.1 < REVI > Key ’ s Function
Press < REVI > Key to display the LCD screen
to the right. The cursor will flash. Press the
UP or DOWN key to select the item in the
menu and then press <
OK> to enter.
F
2.3.8.1a CONVERT :
Converts hardness values to selected scale.
Press < REVI> key to enter system set-
ting menu. Select < CONVERT>
from the menu and press < OK> to ob-
tain selection table. Move cursor to
the desired scale and press <
OK>.
Press < OK> key again to return to
main screen.
Typical scales are listed as:
HARD - Ferrous metals;
SOFT - Non - ferrous metals.
14