background image

Copyrights

All rights to copyrights, registered trademarks, and 

trademarks reside with their respective owners.

Copyright © 2022 PACCAR/Heliox

Notice

This document contains information about one or more 

PACCAR/Heliox products and may include a description of or 

a reference to one or more standards that may be generally 

relevant to the products. The presence of any such 

description of a standard or reference to a standard is not a 

representation that all of the PACCAR products referenced in 

this document support all of the features of the described or 

referenced standard. In order to determine the specific 

features supported by a particular PACCAR product,

the reader should consult the product specifications for that 

particular product. 

PACCAR/Heliox may have one or more patents or pending 

patent applications protecting the intellectual property in the 

PACCAR products described in this document. 

The information in this document is subject to change without 

notice and should not be construed as a commitment by 

PACCAR. PACCAR assumes no responsibility for any errors 

that may appear in this document. In no event shall PACCAR 

be liable for direct, indirect, special, incidental or 

consequential damages of any nature or kind arising from the 

use of this document, nor shall PACCAR be liable for 

incidental or consequential damages arising from use of any 

software or hardware described in this document. 

This document and parts thereof must not be reproduced or 

copied without written permission from PACCAR/Heliox and 

the contents thereof must not be imparted to a third party nor 

used for any unauthorized purpose.

Summary of Contents for DAF POWERCHOICE 360X
























Reviews: