Libcabinet manual
21
Barcode filter
Allows filtering characters from barcodes. Enter a regular expression in this field, for what
characters or character sequences are to be filtered out.
Barcode removed text
This is the string that the barcode sends when a patron card is removed from the reader. Default
value is ”FREECODE” - do not change without reason. If this is set to an incorrect value, the
device will not function properly.
Max fail count before exit
Maximum number of times a patron can attempt to enter his/her pin code, before the system
requires that the patron card is removed and either the patron tries again, or is blocked if the
Block user on fail setting is enabled.
Max patron code length
Maximum number of characters in a patron ID.
Max PIN code length
Maximum number of characters in a patron PIN code.
Min patron code length
Minimum number of characters in a patron ID.
Min PIN code length
Minimum number of characters in a PIN code.
Patron card reader type
Select which reader type you have, for patron cards. Available options are:
Keyboard
: Patron card ID is expected to come through keyboard input buffer. This is the case with
most USB connected readers.
Comport
: This option is for units with patron card reader connected to a serial port (COM), such
as a Quantum reader. If this option is selected, the Patron comport reader parameters setting
must also be correctly filled.
Rfid
: Use this option if you use the RFID reader in the unit to read RFID tagged patron cards.
Rfid and keyboard
: Select this option if you have a mix of barcode reader connected to a USB
port (keyboard input), and also want to use the RFID reader to read RFID tagged patron cards.
Rfid and comport
: Select this option if you have a mix of barcode reader connected to a serial
port (COM), and also want to use the RFID reader to read RFID tagged patron cards.