Instruction Manual
Updated11/2013
19
| 24
7.3 optimizeD charging
As described in 3.2 / Control elements, you will need connection to a server
for this variant. If you have a web-capable computer, you can establish a con-
nection between server and EWS-Box via LAN cable. Afterwards configure the
required HTML page as indicated in the "P-CHARGE EWS Box Quick guide to
operations" under Chapter 2/ Configuration of the LAN connection.
start charging process:
step 1
To start a charging session, plug the cable for the electric vehicle into the ap-
propriate charging socket.
step 2
The "Optimized Charging" process is selected by pressing Button 2 or 5,
respectively.
Depending on the parameters chosen for server connection, the charging ses-
sion may not begin immediately but only then when these parameters have
been fulfilled.
The button is backlit in orange for the duration of the charging process.
terminate charging process:
step 1
The charging process is terminated automatically. This applies either when the
battery of the electric vehicle is fully charged, or once the parameters in the
server settings can no longer be met.
step 2
The cable plug can now be removed from the socket and the outlet becomes
available for further charging sessions.
