Instruction Manual
Updated11/2013
18
| 24
7.2 authorization-free variant
please note:
With this variant, you are neither required to identify yourself
nor to pay to activate / deactivate a charging session!
The charging session is started and terminated in the same way, i.e. by press-
ing the corresponding buttons.
Each user has free access to all charging sockets!
For notes on how to set this authorization-free variant, please refer to
the
"P-CHARGE EWS Box Quick guide to operations"
under
Chapter 4 /
Installation – System parameters
.
start charging process:
step 1
To start a charging session, plug the cable for the electric vehicle into the ap-
propriate charging socket.
step 2
The Start button, Button 1 or 4, begins to flash in green. Now press the
start button to activate the charging process. The button is backlit in green
throughout the entire charging process.
terminate charging process:
step 1
To end the vehicle charging session, press the Stop button, Button 3 or 6, and
remove the plug for the electric vehicle from the charging socket.
step 2
The charging process is thus terminated and the socket is free and available for
a new charging session.
