O
ZRAY
Pollux Small Series – 16M Camera
Page
16
of
40 Manual 1.2
3.2
Trigger Input Design
There are one input triggers and an output trigger on the power connector (pin 5,
and 3). The inputs and output are connected to Opto-islolated I/Os in the camera,
with an input/output voltage range of 2.5 V to 5.0 V. There is a 510 Ω series resistor
in the input path, a 680 Ω series resistor in the output path. The circuit diagram
for the trigger inputs is shown in Figure 5.
Figure 8.
Trigger inputs and Strobe output circuit diagram
