6
7
ENGLISH
FRANCAIS
Reserve Parachute Installation
The Ozium has an integral reserve parachute container with its own specific parachute deployment bag. With a volume of 5ltrs the
reserve pocket of the Ozium will accept most modern reserve parachutes.
IMPORTANT: It is strongly recommended to use the deployment bag supplied with the harness.
WARNING: Ozone strongly recommends that the reserve parachute system is installed by a
qualified professional. Always seek experienced advice if you have any doubts.
To install a reserve parachute you should first pack the parachute so that it matches the shape and
dimension of the supplied deployment bag. Insert the parachute into the deployment bag and secure the
deployment bag with the lines in the normal way. Depending on the size of your parachute you can use
either eyelet for the tightest fit.
Attach the reserve handle to the deployment bag using a larks foot
through the loop.
Attach the harness bridles to the parachute’s bridle using a suitable connector
(not supplied).
Please note, the Ozium is only suitable for reserve parachutes with a short bridle.
ASSEMBLY
Back Protection
Upon delivery the back protection needs to be placed into the structure of the harness.
Insert the back protector into the second, rear most zipped pocket located under the seat, do not try to
force it into the smaller front ballast pocket. The back protector is marked top and front, ensure that it
is inserted correctly, the narrow end should be facing forwards.
It should be a snug fit but you should be able to close the pocket without forcing the zip.
