4. CONTROLS & OPERATION
OPERATION
1. Press and hold the lock-
off switch forward.
Switching On and Off
CAUTION!
BEFORE YOU START THE UNIT, MAKE SURE
THAT THE GRASS TRIMMER IS NOT MAKING CONTACT
WITH ANY OBJECTS.
WARNING!
INSPECT THE AREA TO BE TRIMMED
AND REMOVE ANY WIRE, CORD OR STRING-LIKE
OBJECTS WHICH COULD BECOME ENTANGLED IN
THE ROTATING BLADE.
WARNING!
DO NOT OPERATE THE TRIMMER ON A
TREE, ON A LADDER, OR ON A SCAFFOLD, THIS IS
EXTREMELY DANGEROUS.
CAUTION!
BYSTANDERS MUST KEEP A MINIMUM SAFE
DISTANCE OF 10M AWAY FROM THE TRIMMER WHILE IT
IS OPERATING.
WARNING!
STONES, PIECES OF METAL AND OTHER
OBJECTS CAN BE THROWN OUT AT HIGH SPEED BY
THE BLADE.
2. Squeeze the on/off trigger to
start the trimmer.
3. To stop the trimmer,
release the On/Off
trigger.
NOTE:
DO NOT CUT GRASS WHEN WET. (THE BEST
RESULTS ARE ACHIEVED ON DRY GRASS.)
1. Extend the edging guide to
prevent the cutting head from
getting too close to an object
such as a tree trunk or wall.
2. Hold the trimmer with both
handles for best control and
balance.
3 To turn on squeeze the on/off
trigger whilst holding the lock-off
button down.
4. Move the grass trimmer into the
grass to allow it to cut.
6. Release the on/off trigger and
allow the motor to come to a
complete standstill.
5. Several passes will be required
to cut long grass.
Using the Grass Trimmer
1. Align the ribs of the battery with
the recess in below the handle
and slide in until it clicks into
place.
2. To remove, press and hold the
battery release tab and then slide
out.
Inserting & Removing the Battery
30°
PXCLTK-218
