background image

DESCRIPTION OF SYMBOLS

CARING FOR THE ENVIRONMENT

TROUBLESHOOTING

Power tools that are no longer usable should not be disposed of with household 

waste but in an environmentally friendly way. Please recycle where facilities exist. 

Check with your local council authority for recycling advice.

Recycling packaging reduces the need for landfill and raw materials. Reuse of 

recycled material decreases pollution in the environment. Please recycle packaging 

where facilities exist. Check with your local council authority for recycling advice.

Spare Part 

 

Part No.

Blades 

  PXCLTA-020

Battery pack 2.0Ah   

PXBP-200

Eco charger 

 

PXCG-120 or PXCSCH-120

Spare parts can be ordered from the Special Orders 

Desk at your local Bunnings Warehouse. 
For further information, or any parts not listed here, 
visit www.ozito.com.au or contact Ozito Customer 
Service: 
Australia 1800 069 486 
New Zealand 0508 069 486 
E-mail: [email protected]

SPARE PARTS

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR YOUR 

BATTERY CHARGER.

1. 

Before using the charger read all instructions and cautionary markings on the charger, battery pack 

and the product using the battery pack.

2. 

This charger is not intended for any uses other than charging rechargeable batteries. Any other use 

may result in risk of fire, electric shock or electrocution.

3. 

Do not place any object on top of the charger or place the charger on a soft surface that may result in 

excessive internal heat. Place the charger in a position away from any heat source.

4. 

To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when 

disconnecting the charger.

5. 

Make sure the cord is located so that it will not be stepped on, tripped over, or otherwise subjected 

to damage or stress.

6. 

An extension cord should not be used unless absolutely necessary. Use of an improper extension cord 

could result in the risk of fire, electric shock or electrocution.

7. 

Do not operate the charger if it has received a sharp blow, been dropped or otherwise damaged in any 

way. Have it checked by an electrician or power tool repairer.

8. 

Do not disassemble charger. Take it to an electrician or power tool repairer when service or repair is 

required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire.

9. 

To reduce risk of electric shock, unplug the charger from the outlet before attempting any cleaning. 

Removing the battery pack will not reduce this risk.

10. 

Never attempt to connect 2 chargers together.

11. 

DO NOT store or use the tool and battery pack in locations where the temperature may reach or exceed 

40ºC (such as inside sheds or metal buildings in summer).

12. 

The charger is designed to operate on standard household electrical power (240 volts). Do not attempt 

to use it on any other voltage!

13. 

The battery pack is not fully charged out of the carton. First read the safety instructions and then 

follow the charging notes and procedures.

14. 

The longest life and best performance can be obtained if the battery pack is charged when the air 

temperature is between 18 - 24ºC. Do not charge the battery pack in an air temperature below 10ºC or 

above 40ºC. This is important and will prevent damage to the battery pack.

15. 

Do not incinerate the battery pack even if it is seriously damaged or is completely worn out. The battery 

can explode in a fire.

16. 

Never attempt to open the battery pack for any reason. If the plastic housing of the battery pack breaks or 

cracks, immediately discontinue use and do not recharge.

17. 

During charging, the battery must be placed in a well ventilated area.

BATTERY AND CHARGER SAFETY WARNINGS

Problem Cause

Remedy

Trimmer is not 
starting

Possible clogging

 Clean the cutter head of any grass.

Battery is low in charge

Charge battery

Battery not inserted 

properly

Insert battery pack correctly

Trimmer is not 
operating at 
full capacity

Possible clogging

Clean the cutter head of any grass.

Cutting tall grass at 

ground level.

Make several passes from top down.

Motor 
stops while 
operating

Battery has no power

Charge battery

Grass wraps 

around the 

shaft and 

trimmer head.

Cutting tall grass at 

ground level.

Make several passes from top down.

  

Wear safety glasses

Read instruction manual

Do not expose to rain.

Keep bystanders away. Do not operate whilst people especially 

children or pets are in the area.

Regulator compliance mark

Summary of Contents for PXCLTK-218









Reviews: