Ozito PXC-BIKE, Instruction Manual

Page: 15 / 34

7
3. ATTACHING THE HANDLEBARS
1. Use the M4 Hex Key to loosen the 2 bolts on the Head Tube.
2. Rotate the Head Tube 180 0 around so that the Handlebar
Stem faces forward and is inline with the Front Fork.
3. Using the M4 Hex Key, undo and remove the 4 bolts &
spring washers on the Handlebar Stem. Remove the plate.
4. Hold the Handlebar against the Stem, ensuring that the
cables on the Handlebar are not tangled or twisted around
the Fork or Stem.
5. Replace the plate and loosely fasten the 4 bolts & spring
washers back into place.
6. Adjust the Handlebars so that it is centred on the Stem, then finish tightening the 4 bolts.
7. Adjust the Handlebar Stem and Head Tube against the Front Fork Direction if necessary, and then
re-tighten the 2 bolts on the Head Tube.