4
SETUP & PREPARATION
1. PRE-SETUP DIRECTIONS
Unpacking the Components
• Examine the bicycle for signs of transit damage. If damaged, return to place of purchase.
• The bicycle is shipped in multiple parts; ensure that you have received all of the components.
• Remove all packaging. Be sure to remove the plastic plates from the Wheel centres and Front
Fork.
Tools Required for Assembly
• Hex keys (check specific sizes – M3, M4, M5, M6)
• Screw driver (not included)
• Multi function hex spanner
• Bike pump (not included)
Tightening Torques
Follow the ratings below when tightening components on the bike. It is recommended that a torque
wrench is used.
• Saddle: 8Nm
• Rear Wheel: 45Nm
• Handlebar:6Nm
• Stem: 6Nm
• Brake Cable Anchor Bolt: 8Nm
• Brake Mounting Bolt: 8Nm
• Crank Attachment Systems: 50Nm
WARNING!
POORLY TIGHTENED BOLTS CAN FAIL, RISKING INJURY OR
ACCIDENT.
WARNING!
FAILURE TO INSTALL AND OPERATE ANY COMPONENT OR
ACCESSORY PROPERLY CAN RESULT IN SERIOUS DAMAGE TO THE
PXC BIKE, AND SERIOUS INJURY OR DEATH TO THE RIDER.
Summary of Contents for PXC-BIKE
Page 9: ...ASSEMBLY MAINTENANCE MANUAL 0119 PXC BIKE HYBRID E BIKE...
Page 28: ......
