![background image](http://html1.mh-extra.com/html/ozito/lfg-4100/lfg-4100_instruction-manual_1666379003.webp)
7. Use the above operation in reverse to remove grinding disc.
6. Depress and hold spindle
lock button. Firmly tighten
the outer flange with the
pin spanner.
2. Tighten guard
bolt.
2. SIDE HANDLE & GUARD
3. GRINDING DISC
Side Handle
The side handle can be fitted on either side of your grinder. The
correct position will be determined by your preferred hand and the
operation being performed.
3. Use pin spanner to
loosen the outer flange.
2. Rotate spindle to locate
the lock position.
Removing
2. Remove the side
handle.
CAUTION:
REGULARLY CHECK THAT THE OUTER
FLANGE HAS NOT BECOME LOOSE DURING
OPERATION.
Safety Guard
The safety guard should be used at all times whilst operating the
finishing grinder.
Attaching
Removing
Inspect the grinding disc before fitment to ensure it is not cracked
or deformed. The grinding disc is suitable for grinding tasks only.
Only use grinding discs with a diameter of 100mm.
3. Loosen guard bolt.
Attaching
1. Firmly attach the
side handle in the
desired position on
the grinder.
1. Loosen guard bolt, align tabs and
rotate guard to the required position.
4. Align tabs on the guard with slots on the guard collar. Remove
guard.
1. Depress and hold
spindle lock button.
4. Insert the disc with the
label facing up.
5. Screw the outer flange onto the spindle.
Note:
the ring on the flange must locate within the hole on the
grinding disc.