ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
1. Spindle Lock
2. Adjustable Safety Guard
3. Side Handle
4 Lock On Slide Switch
5 Battery Release Button
6 18V Battery
CORDLESS FINISHING GRINDER
KNOW YOUR PRODUCT
1. BATTERY
ACCESSORIES
SETUP & PREPARATION
7 Pin Wrench
8 Hex Key
9 Charging Adaptor
10 Charging Jack
11 Charging Cradle
Installing and Removing
Slide the battery into the
grinder base until it clicks into
place.
Charging
Hold down the battery release
buttons and slide the battery
out.
Battery Indicator
1. Depress the battery
indicator button.
2. Observe which lights illuminate for a reading on your battery’s
charge.
Charged
Flat
Low Charge
2. Slide cradle onto the battery.
Only the red light will be
illuminated when properly
connected and charging.
1. Plug charging jack into
charging cradle. Both
lights will illuminate when
connected.
This charger is recommended for use with a residual current
device with a rated residual current of 30mA or less.
Note:
Once fully charged, both the red and green lights will
illuminate.
