The Royal grinder consists of three major sections: (A) a detachable
aluminium handle, (B) a precision-milled aluminum body, (C) and a
detachable stainless steel catch cup.
Full Wrap
Silicone Grip
Ergonomic
Pommel
Stainless Steel
Shaft
Adjustment Crown
Guide Bearing
Conical Burr Set
Detachable Catch
Cup with Stainless
Steel Liner (C)
Detachable
Handle (A)
Aluminum
Body (B)
Guide Bearing
Handle Screw
What’s Included in Your Royal Grinder
Thumb Rest
Anti-Popcorning
Cap
Adjusting Your Grind
Lift, Turn & Lock Adjustment Crown
1.
Lift
crown up until you
“feel” a click and it is fully
disengaged from the base.
3.
Lock
grind adjustment
by pushing crown down
until it clicks into base.
2.
Turn
crown to adjust
grind size.
+
Clockwise (increasing
numbers) increases
grind size.
-
Counter - Clockwise
(decreasing numbers)
Decreases grind size.
Dialing-In Your Grind
Three full rotations & 72 individual adjustments
Maximum Dose: 30 grams
Minimum Grind Adjustment: .02mm
Your Royal grinder has 72 adjustments across three rotations of the
adjustment crown: or 24 micro-settings per rotation. You will receive
your grinder set to ZERO. Your grinder will lock up to the right of zero
(rotating your adjustment crown counter-clockwise).
Note:
Never try
to force adjustment crown below Lock Up position.
The lock
up position may decrease over time as your grinder seasons.
NOTE:
Grind settings will vary based on brew method, desired
dose, bean type and roast. Dial-in to your preferences.
Non-58 Flair Models
(fine)
Flair 58 &
Commercial Espresso
(extra fine)
Aeropress
(med. fine)
ZERO
Finest Suggested Grind
Pour Over
(med. coarse)
French Press
(coarse)
3rd Rotation
2nd Rotation
1st Rotation
Thrust Bearing
